Adding an EPD – CMU

This document provides a comprehensive step-by-step walkthrough on how to add an EPD to the Caltrans EPD Database.

OVERVIEW

Steps

1. After Logging in, select "Add New EPD" from Top Ribbon
2. Select Material Type - Concrete Masonry Unit (CMU) and Click Next
3. Fill in all data fields below
   1. EPD Information
   2. Material Type Information
   3. Product Category Rule (PCR) Information
   4. Global Warming Potential (GWP)
4. Select EPD File in PDF format and click Continue
5. Review Data Entry
   1. Verify all the data entered
   2. Click Edit button if revisions are necessary.
   3. Click Submit button if all the data is entered. Congratulations, you have submitted an EPD to the database pending review
6. Check the Status on the Dashboard tab.

DETAILED WALKTHROUGH

Step 1 - After Logging in, select "Add New EPD" from Top Ribbon

Step 2 - Select Material Type - CMU and Click Next

Step 3 – Fill in All Data Fields

Refer to EPD for required information. Data entry will be for users to search/filter EPDs to submit for projects.

Note: EPDs may look different, and information may be presented in different locations in different EPD formats than shown in the example below. However, the information required for database entry is consistent with the EPD reporting requirements per the PCR for CMUs.

a) EPD Information

b) Material Type Information

c) Product Category Rule (PCR) Reference

d) Enter Global Warming Potential (GWP)

Step 4- Select EPD File in pdf format and click Continue

Step 5 - Review Data Entry

a. Verify all the data entered.

b. Click the Edit button if revisions are necessary.

c. Click the Submit button if all data is entered. Congratulations you have submitted an EPD to the database! It will be reviewed by Caltrans, and if no errors are found you will be notified that the EPD has been accepted.

Step 6-Check Status on Database

You can use the Contractor Dashboard to verify the EPD was added to the database. It is currently "pending" and will be reviewed by Caltrans METS. After the EPD has been verified by Caltrans METS, the status will change to "active"

Return to index of instructional guides